1.
Choose Insert > Layer to insert a new layer
above Background layer 2.
Rename the layer as 'Center Panel' 3.
Select frame 5 on Center Panel
layer
and choose Insert
>
Keyframe
4.
Select frame 120 on other two layers i.e. Background and Trace layers 5.
Choose Insert > Frame 6.
Select keyframe 5 on Center Panel layer 7.
Choose File > Import to import center_panel.png
8.
Select the image and choose Insert > Convert to Symbol 9.
Convert it into a Graphic with Top
left registration point selected and name it as 'center panel'
10.
Choose Window > Info and in the Info
panel type the X and Y axis values as 112 and 15
respectively to place the center panel at proper place
11.
Select frame 10 on Center Panel layer and choose Insert
> Keyframe 12.
Similarly select frame 11 and 12, choose Insert
> Keyframe to insert keyframes at both frames 13.
Select keyframe 5 and in the Info panel
type X location of instance as 790
which will shift the center panel out of the stage area
14.
Select keyframe 10 and in the Info panel
type X location of instance as 73
15. Select
keyframe 11 and in the Info panel type
X location of instance
as 130 16.
Select keyframe 5 and choose Window > Properties
to open the Properties panel 17.
In the Properties panel, select Tween
as 'Motion' and set Easing value as
'-100'
18.
Select frame 120 and choose Insert > Frame
19.
Select frame 17 and choose Insert > Keyframe 20.
Also add a keyframe at frame 18 21.
Select center panel graphic at keyframe 17 and in the Properties
panel set Brightness = 40 22.
Select frame 95 and choose Insert > Keyframe 23.
Also add a keyframe at frame 106 24.
Select keyframe 106 and in the Info panel
type X location of instance as 15 25.
Select keyframe 95 and in the Properties panel
select Tween as 'Motion' and set Easing
value as '100' 1.
Choose Insert > Layer to insert a new layer
above Center Panel layer 2.
Rename the layer as 'Map' 3.
Select frame 12 on Map layer and choose Insert
> Keyframe 4.
Choose File > Import to import map.png
5.
Select the image and choose Insert > Convert to Symbol 6.
Convert it into a Graphic with Top
left registration point selected and name it as 'world map' 7.
In the Info panel type the X and Y axis
values as 223 and 17 respectively to place the map at center (Note:
In the Info panel the registration point should be the top left corner as shown
in the image)
| 
